home testimonial3

The most disappointing thing that can happen to you when you are behind schedule to the office is to watch your vehicle’s battery is dead. However, these kinds of issues show up quite often at susceptible times. There can be many reasons behind the abandoned main battery. Noticeably one of them is the cold weather, excessive strain on the battery, short trips, and battery age. Usually, a dead battery is the main issue behind the breakdown service requested by the car owners. 

However, you can go to the service station and replace the battery, and it is not that difficult to do. If you have little knowledge about the different parts of cars like brakes and engines, you can do it easily on your own. The procedure for the same is as follows:

Ensure that your Jaguar or Mercedes battery needs replacement

Before you jump off to get your car another battery, it would be wiser to ensure that your battery needs a battery replacement. And you can check it by doing the following:-

Search for the development of the surface around the terminals: A whitish or blue buildup generally if you found it then you might get the faulty battery. Ensure not touch any buildup bare hands, as it might contain dried-out sulfuric corrosive.

Check the battery with the alternator or the battery meter: A battery should have 12.4 to 12.8 volts without the motor being on and no additional parts.

Purchase the correct replacement battery

It is always suggested to purchase the original battery for your car. Whenever you want another battery, ensure you look for your battery’s specifications and other details. Take guidance from the car’s owner’s manual for the particular battery specifications, including “Ah” ratings.

From where to buy

You can get a vehicle battery from any of the approved service stations. You could browse on the web and look for luxury care if you are in Delhi. A web-based medium can assist you with saving time in going to the market or seller and buying the battery.

Replacing the car battery

Now comes the process to follow to replace the battery:-

Find the old battery and unfasten it: Once you have found your battery, you would have to ensure you know where the positive and negative terminals of the battery are. The positive terminal will be red and have a positive sign, while the negative will have a minus sign and dark.

Disengaging the old battery: You should clear the battery’s negative terminal first. This is expected to save the positive terminal from short-circuiting if it interacts with the grounded part of the vehicle. You will be able to free the terminal with a wrench. Once done, you can now eliminate the positive terminal. And whenever you perform this, you need to mark the cables properly, as if left unmarked, it may obliterate your whole electric circuit.

Eliminate the old battery: Cautiously release the battery holder and protect any screws or clips. You need to pull out the battery cautiously as it may be heavy; it weighs more than 15 kgs.

Put in another Battery: Clean the terminals of the new battery and the cable. Place the new battery in the battery holder and affix it to its place. Ensure the terminal matches the links. This time, connect the positive terminal as before, followed by the negative terminal. Apply battery oil on the terminals. Presently, you are all set—drive Safe.